Stainless Steel Stress diffuser

This product includes 6 incense outlets: 1.5mm, 1.8mm, 2.0mm, 2.5mm, and 3.0mm, suitable for producing different specifications of blended incense

This product is not including any  Incense Outlets.

Regarding the Selection of Incense Outlets:
2.0 and 2.5 outlets: These are commonly used specifications. Coarse powder requires a large outlet, while fine powder can use either a small or large outlet.

1.5 and 1.8 outlets: These should be used with powder graded between 100 and 120 mesh or finer.

2.0 and 2.5 outlets: These can be used with powder graded between 80 and 100 mesh.

3.0 and 4.0 outlets: These can be used with powder around 80 mesh.

Note: Avoid using coarse powder with small outlets, as forceful advancement may damage the machine irreversibly.

When the pushing rod is nearly fully advanced, the machine will suddenly experience increased resistance, indicating that the extrusion process is almost complete. At this point, stop advancing to prevent jamming. If jamming occurs, loosen the screw by turning it in the reverse direction.